XO XOP30S Manual download pdf (Page 24)

- 24 -

• Mounting the hood on the wall (Fig.11A):

Position the xing template on the wall Fig.11B (considering the minimum distance from

the cooker top).

- Make 4 holes respecting the measurement indicated in the gures (Fig.11C).

- Fix the 2 upper screws A without tightening them completely along with the plugs

Fig.11A.

- Hang the hood on the wall, aligning it in a horizontal position and tighten/fasten the

2 screws A. When it has been regulated, x it denitively using the 2 safety screws B

(Fig.11A).

For the various installations use screws and screw anchors suited to the type of wall (e.g.

reinforced concrete, plasterboard, etc.). If the screws and screw anchors are provided

with the product, check that they are suitable for the type of wall on which the hood is

to be xed.

• Limited to installation on plasterboard walls: make sure that the screws are xed to the

wall support elements. If this is not the case, install a support structure made up from 2

by 4 inch cross members in correspondence with the screw anchorage points.

Fig.11



















1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 34 35

No comments

XO XOP30S Manual Page 24